JVC CA-MXDVA5 - Manual (Page 36)

– 31 –
English
Setting the Digital Audio Output
When connecting an amplifier or a decoder to the DIGITAL
OUT terminal, set it as recommended — Linear PCM or
Bitstream.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor
∞ (or 5) to select (highlight)
“6 AUDIO OPTIONS,” then press ENTER.
Audio Options menu appears. (“1 DIGITAL OUTPUT”
must be selected – highlighted.)
3
Press ENTER.
Digital Output selecting screen appears.
4
Press Cursor
∞ (or 5) to select (highlight) an
appropriate output, then press ENTER.
• 1 PCM: Select this when connecting an
amplifier or a decoder incompatible
with Dolby Digital and with MPEG
Multichannel.
• 2 BITSTREAM:Select this when connecting an
amplifier or a decoder compatible with
Dolby Digital and with MPEG
Multichannel.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
SETUP MENU
ENTER RETURN
1 PLAYER MENU
2 DISC MENU
3 AUDIO
4 SUBTITLE
5 PARENTAL
6 AUDIO OPTIONS
7 DISPLAY OPTIONS
ENGLISH
ENGLISH
ENGLISH
ENGLISH
UNLOCKED
AUDIO OPTIONS
ENTER RETURN
1 DIGITAL OUTPUT
2 DTS
3 DYNAMIC COMPRESSION
4 2X SCAN AUDIO
PCM
OFF
ON
OFF
DIGITAL OUTPUT
ENTER RETURN
1 PCM
2 BITSTREAM
Setting the DTS Signal Output
When connecting an amplifier or a decoder compatible with
the DTS Digital Surround to the DIGITAL OUT terminal, set
“DTS” setting to “ON.”
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor
∞ (or 5) to select (highlight)
“6 AUDIO OPTIONS,” then press ENTER.
Audio Options menu appears. (“1 DIGITAL OUTPUT”
must be selected – highlighted.)
3
Press Cursor
∞ (or 5) to select (highlight)
“2 DTS,” then press ENTER.
4
Press Cursor
∞ (or 5) to select (highlight) an
appropriate output, then press ENTER.
• 1 ON: Select this when connecting an amplifier or a
decoder compatible with DTS Digital
Surround.
• 2 OFF: Select this when connecting an amplifier or a
decoder incompatible with DTS Digital
Surround. (No digital signal comes out
through the DIGITAL OUT terminal.)
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
DTS
ENTER RETURN
1 ON
2 OFF
AUDIO OPTIONS
ENTER RETURN
1 DIGITAL OUTPUT
2 DTS
3 DYNAMIC COMPRESSION
4 2X SCAN AUDIO
PCM
OFF
ON
OFF
EN28-35.CA-MXDVA5[UG]_f 01.3.23, 1:45 PM 31