Connecting the speakers – JVC CA-UXQ3S User Manual

Page 11

Advertising
background image

Introduction

8

Pre

p

aratio

n

There is no difference between the left and right
speakers.

CAUTION

• Do not short-circuit the and speaker termi-

nals. Doing so may damage the speakers.

• Do not connect other speakers together with the

supplied speakers. The change in impedance
may damage the main unit and the speakers.

NOTE

• Improper speaker cord connection spoils the stereo

effect and sound quality.

• The impedance of speakers connected to this

product must be within the range 4

Ω to 16 Ω.

• Cooling fan is built into the main unit for emitting

generated heat. When you turn on the main unit,
the internal cooling fan automatically starts
rotating. To ensure sufficient cooling, leave a
space of more than 1 cm between the main unit
and the speakers or other objects.

• The supplied speakers do not conform to mag-

netically shielded design. Place the speakers
enough distance from a TV so that they do not
cause color irregularity on the TV.

Connecting the Speakers

Speaker cord

Speaker cord

Red

Black

Red

Black

Right speaker (rear view)

Left speaker (rear view)

Main unit (rear view)

Speaker cord

You can detach the speaker cover.

Speaker
cover

After connecting the speakers, gently pull on the
speaker cords to make sure the cords are firmly
connected and do not pull out.

UX-Q3[A].book 8 ページ 2004年9月8日 水曜日 午前11時15分

Advertising