JVC CA-UXQ3S - Manual (Page 26)

23
Convenient Functions
Using the Timers
When the specified time passes, the main unit
automatically turns off.
Press .
• Each time you press , the time display
(in minutes) toggles as follows.
Example: To set the sleep timer to 60 minutes
NOTE
• When you set the sleep timer, the display window
automatically dims.
• Before the clock has been set (While "0:00" is
flashing), when you press , "CLOCK
ADJUST!" appears.
• Press repeatedly to select the time again.
• With the sleep timer activated, press once.
You can use the recording timer function to record
FM/AM broadcasts or sound from other equipment
to a cassette tape.
You can enter up to three timer settings in total for
the recording timer and the playback timer
(
page 25).
NOTE
• Timer settings remain unchanged until the timer is
replaced by new setting.
1
Prepare the sound source.
2
Insert a cassette tape. ( page
19)
3
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER1" is selected
4
Press .
5
Set the starting time and ending
time.
Example:To set the recording time from 6:30
a.m. to 6:45 a.m.
• For setting the clock, refer to "Setting the
Clock" ( page 10).
Entering the hour → → Entering the
minute →
Sleep Timer
Number buttons
Cancel (Sleep
indicator disappears.)
Sleep indicator
Changing the sleep timer setting
Recording Timer
Radio Preset the radio station whose
broadcast you want to record. (
page 15)
Other
equipment Follow the operation manual for the
equipment.
Confirming the sleep timer setting
(remaining time)
Timer number
Set the clock beforehand. ( page 10)
UX-Q3[A].book 23 ページ ２００４年９月８日 水曜日 午前１１時１５分