Recording sound to cassette tapes, Preventing recorded sound from being erased – JVC CA-UXQ3S User Manual

Page 24

Advertising
background image

21

Recording Sound

Recording Sound to Cassette Tapes

Main unit

Remote control

NOTE

• The sound input level during recording is

automatically adjusted.

• When you record tracks from a CD or MP3, a 4-

second blank is inserted between tracks in the

recording. You can record tracks with no blank
time. (

page 22)

CAUTION

• It may be unlawful to record or playback

copyright material without the consent of the

copyright owner.

• Do not use long cassette tapes such as C-120 or

C-150. Long cassette tapes are thin and stretch
easily, and may become tangled in the inner part
of the main unit.

• Since this product is not compatible with TYPE II

and TYPE IV cassette tapes, do not use these

types of cassette tapes. This product does not

meet the specifications for these tapes, so sound

is not properly recorded to these types of cas-

sette tapes. You cannot obtain proper playback

sound.

• Write protect tags are attached to a cassette

tape for preventing the erasing of recorded

sound. They enable you to avoid losing impor-

tant recordings because once you snap off the

write protect tags, you cannot record to the cas-

sette tape or erase recorded material.

• When you want to use the cassette tape for

recording again, cover the tag holes with adhe-

sive tape.

1

Insert a cassette tape for

recording.

• Before inserting the cassette tape, wind the

tape past the leader part of the cassette
tape.

2

Press

to select the reverse

mode.

• Each time you press

, the display tog-

gles as follows.

3

Select a sound source for recording.

4

Press

on the main unit.

Preventing recorded sound from

being erased

Sound source

Operation

CD or MP3

Press

, and then press

.

(The CD is stopped.)

Radio broad-
cast

Select the radio station whose broad-
cast you want to record (

page 14).

Sound from
other equip-
ment (AUX)

Press

and prepare playback on

the other equipment (

page 20).

Write protect
tag for side A

Write protect
tag for side B

Magnetic tape
(recordable part)

Leader tape (unrecordable part)

: For one-way recording on either side.

: For one return recording on both sides.

: Pressing

automatically starts

one return recording on both sides.

UX-Q3[A]-09.fm 21 ページ 2004年9月21日 火曜日 午後4時42分

Advertising