JVC CA-UXQ3S - Manual (Page 14)

11
(Continued)
Basic Operations
Press (or on the main unit).
• With the power off, pressing either button
turns on the main unit.
Remote control:
Main unit:
Pressing one of these buttons other than
changes the sound source. When a
CD or cassette tape has been loaded, play-
back starts.
NOTE
• Cooling fan is built into the main unit for emitting
generated heat. When you turn on the main unit,
the internal cooling fan automatically starts rotating.
Press .
NOTE
• You can also adjust the volume by turning the VOL-
UME control on the main unit.
• You can adjust the volume within the range 0 to 40.
Press .
• "FADE MUTING" appears and the volume
reduces to "0".
• To return to the previous volume, press
again.
Press .
• Each time you press , AHB PRO
function toggles between "ON" and
"OFF".
• While AHB PRO function is activated,
is displayed in the display
window.
• "AHB PRO" stands for "Active Hyper
Bass PRO".
Press .
• Each time you press , the display tog-
gles as follows.
• While the sound mode is set to an item other
than "NORMAL", is displayed in
the display window.
NOTE
• This function does not affect recording sound.
Sound mode
A combination of JVC sound technologies
enables you to select the desired sound
pattern.
1
Press repeatedly to display
"NORMAL".
2
Press to display "BASS" or
"TREBLE".
3
While "BASS" or "TREBLE" is dis-
played in the display window, press
to adjust the sound quality.
• You can adjust the sound quality within the
range -5 to +5.
• The display returns to the sound source dis-
play in a few seconds.
Turning On/Off the Main Unit
Adjusting the Volume
Temporarily Turning Off the
Sound (FADE MUTING)
Emphasizing Heavy Bass
Sound (AHB PRO)
Sound Mode
Adjusting the Sound Quality
: For sharp sound.
: For soft sound.
: For background music.
: For refreshing sound.
: For melancholy sound.
: Cancels the sound
mode (factory setting).
: Adjusts the bass sound.
: Adjusts the treble sound.
UX-Q3[A].book 11 ページ ２００４年９月８日 水曜日 午前１１時１５分