JVC SR-MV30 - Manual (Page 41)

Masterpage:Right+
EN
41
Filename [SR-MV30U_06DVD Operation2.fm]
Page 41 March 30, 2004 5:46 pm
OPERATIONS ON DVD DECK
You can program this unit to timer-record as many as 8 programs.
With the VCR Plus+ system, timer programing is greatly simplified
because each TV program has a corresponding code number
which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1
Load a recordable disc.
2
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3
Press VCR PLUS+ to access the VCR Plus+ screen.
4
Press the number keys to
enter the PlusCode number of a
program you wish to record, then
press ENTER.
● If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
● To clear all entered numbers at a
time, press CLEAR(8).
● If the number you entered is invalid, “PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV
screen. Input a valid PlusCode number.
● If “GUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU WANT
TO RECORD” appears on the TV screen, set Guide Channel
Numbers manually. (
੬ pg. 77)
● When “PROGRAM FULL DELETE UNWANTED TIMER PROGRAM”
appears on the TV screen, you need to cancel some of the reserved
programs. (
੬ pg. 45)
5
The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
program data.
● To cancel this setting, press VCR PLUS+ or RETURN.
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
● “STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
● “DAILY/WEEKLY” ( ੬ pg. 41, “Daily/Weekly Recording”))
● “REC MODE” ( ੬ pg. 38, “Recording Mode”)
● “NAME” ( ੬ pg. 57, “Modify Program Name”)
7
Press ENTER to access the Program Confirmation screen.
8
Press ENTER to complete timer programing.
● To program another timer, repeat steps 3 – 8.
● If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 46.
9
Press DVD TIMER (#) to engage the unit’s timer mode. The
DVD timer lamp lights up on the unit and the VCR deck is
automatically selected. When the VCR deck is in timer standby
mode, the unit is automatically turned off.
● To disengage the timer mode, press DVD TIMER (#) again.
NOTES:
● There may be cases that VCR Plus+ Timer Programing function
prolongs the stop time of the programing.
● When two successive programs are recorded on a DVD-RW disc with
VCR Plus+ Timer Programing function, the beginning of the second
one may be left off the recording.
● VCR Plus+ Timer Programing is not possible on the discs used
exclusively for On-Disc Timer Programing.
● If the copy limited program is received during timer-recording, the unit
enters Record Pause mode. Recording starts again if it is switched to
a recordable broadcast during the time you programed.
Daily/Weekly Recording
You can record programs with one of the following weekly/daily
timer settings.
WEEKLY : Select to record a weekly program.
MON–FRI : Select to record a daily program from Monday through
Friday.
MON–SAT : Select to record a daily program from Monday through
Saturday.
SUN–SAT : Select to record a daily program from Sunday through
Saturday.
VCR Plus+ ® Timer Programing
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “Changing VCR Plus+
® Setting” ( ੬ pg. 77) and
set the Guide Channel number correctly.
1
4
7
2
5
8
0
3
6
9
0 – 9
RETURN
ENTER
VCR PLUS+
CLEAR (8)
CANCEL
DVD TIMER (#)
VCR/DVD
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 5. When this
happens, set the correct Guide Channel number for that station.
(
੬ pg. 77, “Changing VCR Plus+ ® Setting”)
Cable Box and DBS Receiver Users
To timer-record a satellite broadcast using the VCR Plus+
system:
A Perform “Cable Box and/or DBS Receiver Control Setting
(DVD Deck Only)” (
੬ pg. 22).
B Perform “VCR Plus+ ® Timer Programing” ( ੬ pg. 41).
C Leave the cable box or DBS receiver’s power on.
SR-MV30U_00.book Page 41 Tuesday, March 30, 2004 5:46 PM