Manual dubbing (from vcr to dvd), Dubbing a part of a cassette – JVC SR-MV30 User Manual

Page 63

Advertising
background image

Masterpage:Right+

EN

63

Filename [SR-MV30U_09Editing.fm]

Page 63

March 30, 2004 5:46 pm

EDITING

Dubbing A Part Of A Cassette

You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.

1

For DVD deck

Load a recordable disc.

For VCR deck
Load a cassette you want to dub.

2

Press VCR] to select the dubbing direction.

● “VCR]” lights up on the front display panel.

3

Prepare the VCR deck for dubbing.

A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
8, 9

4

Prepare the DVD deck for dubbing.

A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
C Press and hold 9, then press 7 so that the DVD deck enters
the Record Pause mode.

5

Press and hold DUBBING for more than 2 seconds to start

dubbing.

6

Press 8 to stop recording on the DVD deck. Then press VCR/

DVD, and press 8 to stop playback on the VCR deck.
NOTES:

● If you set the dubbing direction incorrectly, you could erase an

important recording that you wanted to dub. It is recommended to
conduct a test with unimportant cassettes first.

● There may be a discrepancy of several seconds between where you

intend dubbing to start, and where it actually stars.

● The superimposed indication during the operation or dubbing is not

recorded.

● It is not possible to dub a tape with a copy protection signal.

● If the recording capacity of disc become full, the tape stops

automatically.

● It is not possible to perform other operations like Live Memory

Playback. Check the recorded program on the disc after dubbing.

● Dubbing is not possible on the discs used exclusively for On-Disc

Timer Programing.

● When dubbing can not be performed properly, set “BLUE BACK” to

“OFF”. (

੬ pg. 76)

Manual Dubbing (From VCR To DVD)

● Turn on the unit.

● Turn on the TV and select the video channel (or AV mode).

● Slide the TV/CABLE/DBS/DVD switch to DVD.

1

4

7

2

5

8

0

3

6

9

REC MODE

7

5

3

4

9

8

VCR/DVD

8

VCR ]

DUBBING

4

73

9 5

VCR/DVD

SR-MV30U_00.book Page 63 Tuesday, March 30, 2004 5:46 PM

Advertising