Sound adjustments, English, Adjusting the subwoofer output level – JVC RX-7520VBK User Manual

Page 23: Press sound, Reinforcing the bass, Press bass boost to select the bass boost function, Adjusting the tone, On the front panel

Advertising
background image

20

English

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have connected a
subwoofer and set the subwoofer information correctly—“YES.”

On the front panel:

Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step

1 again.

1

Press ADJUST repeatedly until
“SUBWFR” (with the current setting)*
appears on the display.

* “0” is the initial setting. If you have already changed the

setting, another number (level) will be shown.

2

Press CONTROL UP

5/DOWN to

adjust the subwoofer output level
(–10 to +10).

From the remote control:

1

Press SOUND.

The 10 keys are activated for sound adjustments.

2

Press SUBWOOFER +/– to adjust
the subwoofer output level
(–10 to +10).

Note:

Subwoofer output level cannot be adjusted when using headphones.

Reinforcing the Bass

You can boost the bass level.

Press BASS BOOST to select the bass boost
function.

• Each time you press the button, the bass boost function turns

on (“BASSBOOST ON”) and off (“BASSBOOST OFF”).
– Select “BASSBOOST ON” to activate the bass boost function.

The BASS BOOST indicator lights up on the display.

– Select “BASSBOOST OFF” to cancel it.

The indicator goes off.

Note:

This function affects the front speaker sounds only.

BASS BOOST

From the remote control

On the front panel

BASS BOOST

Sound Adjustments

Adjusting the Tone

You can adjust the bass and treble sounds as you like.

Before you start, remember....
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step

1 again.

1

Press ADJUST repeatedly until “BASS”
or “TREBLE” (with the current setting)*
appears on the display.

* “0” is the initial setting. If you have already changed the

setting, another number (level) will be shown.

BASS

: To adjust the bass.

TREBLE : To adjust the treble.

2

Press CONTROL UP

5/DOWN to

adjust the bass or treble sounds level
(–10 to +10).

• Each time you press the button, the sound

level changes by ±2 steps.

ADJUST SETTING

SUBWOOFER

0

10

100

Remote

NOT

CONTROL

DOWN

UP

CONTROL

DOWN

UP

SOUND

ADJUST

SETTIN

L

C

S.WFR

LS

RS

CH-

S

LFE

SPK

DIGITAL AUTO

LINEAR PCM

1

R

L

C

S.WFR

LS

RS

CH-

S

LFE

SPK

DIGITAL AUTO

LINEAR PCM

1

R

EN10-22.RX-7520V[C]f.pm5

02.2.14, 4:32 PM

20

Advertising