Jensen JiMS-520i User Manual
Page 12
11
4.
To listen to your desired station, press the
▲
or
▼
Buttons or directly key in the preset channel
using the NUMERIC Buttons. For example to receive preset station 5, first press the “0” Button and
then the “5” Button.
AUX OPERATION
You can play other music sources (iPod shuffle, MP3, CD or other digital audio player) through the
speakers of JiMS-520i by connecting its AUX IN Jack to your external player’s LINE OUT jack or
headphone jack.
1. Plug one end of the included cord into the AUX IN jack on the back of JiMS-520i. Plug the other end
of the cord into your external audio player, such as an iPod shuffle, CD, MP3 Player etc.
2. Power on JiMS-520i and the external player.
3. Press the FUNCTION Button to select the AUX mode.
4. Start playing your iPod shuffle, MP3, CD or other digital audio
player.
5. Slowly adjust both the volume on JiMS-520i and the external device
.
6. Press the EQ Button repeatedly to choose the desired equalizer effect.
7. Turn off the attached player when finish listening.
8. Press
the Button to turn JiMS-520i off and unplug the cord from the AUX IN jack.
Note:
i.
The Display will change from showing “AUX” to the current time 1 minute after the system
enters the AUX function mode.
ii.
To check the current function mode, press the Volume +/- Buttons once. The Display will first
show the Volume Level and then “AUX“ for about 1 minute and revert to current time.