JVC RX-430VBK - Manual (Page 31)

English
Page 26
SURROUND
Using Dolby Surround
Once you have set the Dolby Surround adjustments, you can use the same adjustments every time you want
to enjoy Dolby Surround.
On the front panel:
1. Press SURROUND so that the Control % % % % % / fi fi fi fi fi buttons work for selecting the surround modes.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the
display.
The PRO LOGIC or 3CH LOGIC indicator also lights up.
Each time you press the button, the surround modes change as follows:
The indicator of the selected surround mode lights up in turn as you select the surround modes.
3. Select and play a sound source which was processed with Dolby Surround and is labeled with
DOLBY SURROUND
mark.
To cancel Dolby Surround, select “OFF” in step 2 above. The indicator of the selected mode goes off.
From the remote control:
1. Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH
LOGIC, HALL) lights up on the display.
The previous mode is recalled (at its previous settings) and is shown on the display.
Each time you press the button, the surround mode turns on and off.
2. Press AUDIO CONTROL so that 10 keys work for adjusting the sound.
3. If necessary, press SURR MODE until “PROLOGIC” or “3CHLOGIC” whichever you want
appears on the display.
Each time you press the button, the surround modes change as follows:
The indicator of the selected surround mode lights up in turn as you select the surround modes.
4. Select and play a sound source which was processed with Dolby Surround and is labeled with
DOLBY SURROUND
mark.
To cancel Dolby Surround, press SURROUND ON/OFF so that the indicator of the selected mode goes
off.
Each time you press the button, the surround mode turns on and off.
SURROUND
ON/OFF
AUDIO
CONTROL
6
SURR MODE
PROLOGIC 3CHLOGIC HALL
OFF
PROLOGIC 3CHLOGIC HALL
RX-430VBK(EF)_0022-001A_En 97.4.24, 1:56 PM 26