Getting started, Connections, Connecting to a tv – JVC 0905TNH-FN-FN User Manual

Page 17: Connecting to external equipment, Follow steps 1 and 2 above, Coaxial, Av2 (rear)

Advertising
background image

17

G

ett

ing
S

tarted

EN

Connections

Connecting to a TV

Connect the unit to a TV after considering the
capabilities of your existing equipment.

Before installation, plug off your TV and this
unit.
Using the Scart jack

1

Connect the antenna or cable to the

ANTENNA IN jack of this unit.

2

Connect the ANTENNA OUT jack of

this unit to the Aerial jack of your TV.

Use the supplied RF cable.

3

Connect AV1 (TV) Scart jack of this

unit to the Scart jack of your TV. Use

the supplied Scart cable or a

commercially available Scart / RCA

cable.

Note

• If your TV does not have a Scart jack, use

commercially available Scart adaptor or Scart / RCA
cable to connect. Use only AV1 (TV) or AV2
(DECODER) jack for the VCR output signals of this unit.

Using the S-VIDEO OUT jack and the AUDIO
OUT jacks (only for DVD)

If your TV has an S-Video input jack, use S-Video and
Audio cables to connect.

1

Follow steps 1 and 2 above.

2

Connect S-VIDEO OUT jack of this

unit to the S-Video input jack of your

TV. Use a commercially available

S-Video cable.

3

Connect the AUDIO OUT jacks of this

unit to the analogue Audio input

jacks of your TV. Use a commercially

available Audio cable.

Connecting to External Equipment

This unit has three input terminals, AV1 or AV2 on the
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.

Recording from a DVD player, VCR or other

Audio-Video equipment with a Scart output

jack (AV2)

Getting Started

DVD/VCR

AV2(DECODER)

AUDIO

OUT

IN

OUT

L

R

S-VIDEO

OUT

AV1(TV)

DVD

ANTENNA

DIGITAL

AUDIO OUT

COAXIAL

2

3

3

3

1

Cable
Signal

Antenna

RF cable
(not supplied)

RF cable
(supplied)

Scart cable (supplied)

or

Scart/RCA
cable (not
supplied)

To Aerial jack

Audio/Video cable (not supplied)

Scart adaptor
(not supplied)

or

or

Note for a TV with no S-Video input jacks or
Scart jack:
• This unit has no RF modulator, so this type of TV

cannot be used.

DVD/VCR

AV2(DECODER)

AUDIO

OUT

IN

OUT

L

R

S-VIDEO

OUT

AV1(TV)

DVD

ANTENNA

DIGITAL

AUDIO OUT

COAXIAL

AUDIO IN

S-VIDEO IN

S-Video cable

(not supplied)

Audio cable
(not supplied)

DVD/VCR

AV2(DECODER)

AUDIO

OUT

IN

OUT

L

R

S-VIDEO

OUT

AV1(TV)

DVD

ANTENNA

DIGITAL

AUDIO OUT

COAXIAL

AV output jack
(Scart)

Scart cable (supplied)

AV2 (Rear)

E9770ED_EN.book Page 17 Wednesday, August 3, 2005 6:35 PM

Advertising
This manual is related to the following products: