JVC 0905TNH-FN-FN - Manual (Page 9)

9
Bef
o
re Y
o
u S
tart
EN
Rear Panel
1 Mains cable
• Connect to a standard AC outlet.
2 AV2 (DECODER) (DVD/VCR)
• Connect to VCR, camcorder, or other Audio-
Video equipment. Use a commercially available
Scart cable.
3 AV1 (TV) (DVD/VCR)
• Connect to the Scart jack on your TV. Use the
supplied Scart cable.
4 COAXIAL DIGITAL AUDIO OUT jack
(DVD)
• Connect to an amplifier with digital input jacks
such as a Dolby Digital decoder or DTS
decoder. Use a commercially available Coaxial
cable.
5 AUDIO OUT jacks (DVD)
• Connect to the audio input jacks on your TV.
Use commercially available Audio cables.
6 S-VIDEO OUT jack (DVD)
• Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
7 ANTENNA IN (DVD/VCR)
• Connect to an antenna or a cable.
8 ANTENNA OUT (DVD/VCR)
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system. Use the supplied RF
cable.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
• This unit does not have an RF modulator.
DVD/VCR
AV2(DECODER) AUDIO
OUT
IN
OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD ANTENNA
DIGITAL
AUDIO OUT
COAXIAL
7 2 1 3 4 5 8 6
E9770ED_EN.book Page 9 Wednesday, August 3, 2005 6:35 PM