JVC 0905TNH-FN-FN - Manual (Page 64)

VC
R
Fu
nc
tion
s
64 EN
Playback
1
Press [ STANDBY/ON /I ] to turn on
the unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2
Press [VCR].
3 Insert a prerecorded tape, then press
[PLAY
P] to begin playback.
4
During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
5
Press [PLAY P] to resume playback.
6
Press [STOP S] to stop playback.
7 Press [VCR STOP/EJECT S/O] on
the unit to eject the tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[PR +/- ].
Recording and One-Touch Timer
Recording (OTR)
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing the
number buttons on the remote control.
• There is a tape with a record tab in the unit.
• The desired recording speed is selected in SP
(standard play) or LP (long play) mode by pressing
[REC SPEED] on the remote control.
• Refer to page 29 for instructions on timer recording.
1
Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR].
3
Select the recording speed using
[REC SPEED].
• The desired recording speed is selected in SP
(standard play) or LP (long play) mode by
pressing [REC SPEED].
4
Select the desired channel to record
using [PR +/-] or [the Number
buttons].
5 Press [VCR REC I] to start
recording.
To temporarily stop recording or to resume it,
press [PAUSE
p]. After the unit has been in
pause mode for 5 minutes, it will stop
automatically to protect the tape and the video
head from damage.
6 Press [STOP S] when the recording
is completed.
VCR Functions
VCR VCR
Tape speed Recording / Playback Time
Type of tape E60 E120 E180
SP mode 1 hour 2 hours 3 hours
LP mode 2 hours 4 hours 6 hours
VCR VCR
E9770ED_EN.book Page 64 Wednesday, August 3, 2005 6:35 PM