Receiving fm stations with radio data system, Changing the radio data system information, Searching for programs by pty codes (pty search) – JVC SP-UXNB7DAB User Manual

Page 14

Advertising
background image

11

Receiving FM Stations with Radio Data System

Radio Data System allows FM stations to send an additional signal along with their regular program signals.
With the System, you can receive the following types of Radio Data System signals.

PS (Program Service):

Shows commonly known station names.

PTY (Program Type):

Shows types of broadcast programs.

RT (Radio Text):

Shows text messages the station sends.

Enhanced Other Networks: Provides the information about the types of the programs broadcast by the Radio Data

System stations of the diff erent networks.

NOTE
If you want to know more about Radio Data System, visit <http://www.rds.org.uk>.

Changing the Radio Data System

Information

Each time you press the button, the main
display changes as follows:

PS

PTY

Frequency

(Non-Radio Data System signal)

RT

NOTE
If no Radio Data System signals are sent by a station,
“NO PS,” “NO PTY,” or “NO RT” appears on the main display.

Searching for Programs by PTY

Codes (PTY Search)

While listening to an FM station:
You can locate a particular kind of program from the 30
preset stations (see page 12) by specifying PTY codes.
While listening to a DAB service:
You can locate a particular kind of program from among
all the services you can receive by specifying PTY codes.

For details about PTY codes, see page 19.

1

Press to enter the PTY code setting
mode.

“PTY” and “SELECT” appear on the
main display.

2

or

Select a PTY code.

3

The System starts searching, stops
when it fi nds the program of
the selected PTY code (“FOUND”
appears on the display), and tunes
in to it.

NOTES
• To stop searching any time during search for FM stations,

press PTY SEARCH.

• To stop searching any time during search for DAB

services, press CANCEL or PTY SEARCH.

• To continue searching after it stops on an unwanted

program/service, press PTY SEARCH again while the PTY
code is fl ashing on the display.

• If no program/service is found, “NOTFOUND” appears on

the display.

EN_01_20_UX-NB7DAB[B]ff.indd 11

EN_01_20_UX-NB7DAB[B]ff.indd 11

06.7.6 11:27:16 AM

06.7.6 11:27:16 AM

Advertising