JVC SP-UXNB7DAB - Manual (Page 6)

3
SPEAKERS PHONES
RIGHT
IMPEDANCE
MIN
LEFT
ANTENNA
COAXIAL
AM EXT
LOOP
DAB
Connections
Do not connect the AC power cord until all other connections have been made.
To a wall outlet
Plug the AC power cord only after
all connections are complete.
To connect the speaker cords
Make sure the both speakers are connected
correctly and fi rmly.
When connecting the speaker cords, match the
polarity of the speaker terminals: white cord to (+)
and white cord with black stripe to (–).
NOTES
• Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep
the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause
poor reception.
• If the cords are covered with vinyl, remove the vinyl to expose the tip of the cord by twisting the vinyl.
FM antenna (supplied)
Extend it so that you can
obtain the best reception.
DAB antenna (supplied)
Extend the wire so that you can
receive your desired ensembles.
For better DAB reception
Disconnect the supplied DAB antenna, and connect an active
antenna.
(See “Improving the DAB reception” on page 10.)
Active antenna
(not supplied)
EN_01_20_UX-NB7DAB[B]ff.indd 3 EN_01_20_UX-NB7DAB[B]ff.indd 3 06.7.6 11:27:05 AM 06.7.6 11:27:05 AM