John Lewis JLBICO2 - Manual (Page 11)

Symbol Function Microwave
power Foods
Microwave +
hot air 200 - 600W Quick meat, fish and poultry roasting. Baking cakes
Grill +fan --- Grilling meat and fish
--- Grilling poultry
--- Potatoes – deep-frozen, defrosting and roasting
Altering parameters
The operating parameters (time, power,
temperature) can be altered when the oven is
operating or when the cooking process has
been interrupted by proceeding as follows:
1. Select the parameter to be change with
the Parameter selection keys. The
respective symbol and the display start
blinking.
2. Set the desired value with the '+' and '–'
keys.
3. Press the Confirmation key or wait 3
seconds to validate the new parameter
value. The display and symbols stop
blinking.
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word
“End”.
The beeps are repeated every 30 seconds
until the door is opened or the Cancel key is
pressed.
Cancelling a cooking
cycle
If you wish to cancel the cooking process,
press the Cancel key twice.
You will then hear a beep and the time will
appear on the display.
Interrupting a cooking
cycle
You can stop the cooking process at any time
by pressing the Cancel key once or by opening
the oven door.
In both cases:
• Microwave emission is stopped
immediately.
• The grill is de-activated but is still very hot.
Danger of burning!
• The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the Cancel
key.
To restart the process, close the door and
press the Start key
11