JVC DLA-M2000LU - Manual (Page 17)

No.51781
1-17
DLA-M2000LU DLA-M2000LE
24
Connecting to Various Devices
Connecting to Video Devices
Before connection, be sure to turn off both the projector and video device.
• Read thoroughly the manual that comes with each video device.
• Use the supplied AV connection cable. An AV connection cable with an S-video (Y/C) terminal is not supplied.
Notes
• Connect a composite image signal output device or Y/C (S-video) image output device.
• When an image signal is input to the AV IN (VIDEO or Y/C) terminal, input the sound signal to the AUDIO terminal of the AV
IN terminals.
Memo
• When connecting a video device, use a TBC along with it, or one which has a built-in TBC.
• Use of an extension cable to connect a video device and the projector could cause video degradation.
• When a signal with much jitter is reproduced on a VCR, or special-effect playback is performed, the upper part of the image
or the image itself may be erased or distorted.
Y
P B /B-Y
P R /R-Y
H
V
G
B
R AUDIO
REMOTE
PC AUDIO
RS-232C
Y/C VIDEO
• Camcorder
To Y/C
AV connection cable
(accessory)
To
VIDEO
To
AUD
IO
Video devices
• Laser videodisc player
• VCR (Video cassette recorder)
S-video cable
(separately available)
BNC-RCA
conversion plug
(accessory)
To AV IN
25
Connecting to Various Devices
ENGLISH
DEUTSH
FRAN
Ç
AIS
ITALIANO
ESPA
Ñ
OL
Connecting to Hi-Vision Devices
Before connection, be sure to turn off both the projector and Hi-Vision devices.
• Read thoroughly the manual that comes with each Hi-Vision device.
• Use separately available BNC cables and audio cables to connect Hi-Vision devices.
Notes
• Connect a component signal output device or DTV-format signal output device.
• When the PC2 input terminal is used, “PC2 (BNC)” must be selected from the menu options. Refer to “Setting and Adjusting
Other Functions (OPTIONS)” on page 52.
• When the image signal is input to the PC2 input terminal, input the sound signal to the PC AUDIO terminal.
Memo
• Other devices with component signal output terminals (DVD player (NTSC), etc.) can be connected.
(*DVD: Digital Video Disc)
• DTV-format signals (480i, 480p, 720p, 1080i) can be input. For DTV-format signals which can be handled, refer to “Video
signals” on page 22.
Y
P B /B-Y
P R /R-Y
H
V
G
B
R AUDIO
REMOTE
PC AUDIO
RS-232C
Y/C VIDEO
• Text/video camera
• Hi-Vision video camera
Hi-Vision devices
• W-VHS VCR
BNC cable
(separately available)
To P R /R-Y
To P B /B-Y
To PC AUDIO
To Y
Audio cable
(separately available)
To PC2