JVC DLA-M2000LU User Manual

Page 6

Advertising
background image

No.51781

1-6

DLA-M2000LE

3

ENGLISH

DEUTSH

FRAN

Ç

AIS

ITALIANO

ESPA

Ñ

OL

POWER CONNECTION
(United Kingdom only)

WARNING

Do not cut off the main plug from this equipment.
If the plug fitted is not suitable for the power points in your
home or the cable is too short to reach a power point, then
obtain an appropriate safety approved extension lead or
adapter or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and
dispose of the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the main supply.

If a new main plug has to be fitted, then follow the instruction
given below:

WARNING:

THIS APPARATUS MUST BE EARTHED.

IMPORTANT:

The wires in the mains lead on this product are coloured in
accordance with the following cord:

Green-and-yellow:

Earth

Blue:

Neutral

Brown:

Live

As these colours may not correspond with the coloured
making identifying the terminals in your plug, proceed as
follows:

The wire which is coloured green-and-yellow must be

connected to the terminal which is marked

with the letter

E or the safety earth or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.

When replacing the fuse, be sure to use only a correctly
rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT

ELECTRICIAN.

How To Replace The Fuse
Open the fuse compartment with the blade screwdriver, and
replace the fuse.
(* An example is shown in the illustration below.)

Fuse

4

Contents

SAFETY PRECAUTIONS ................. 2
Contents ........................................... 4
Accessories ..................................... 5
Controls and Features .................... 6

Front Side / Top Surface / Right Side .....................6
Left-hand Side / Rear Side......................................7
Bottom Surface .......................................................8
Control Panel on the Projector ................................9
Connector Panel ...................................................11
Remote Control Unit..............................................12
Installing Batteries.................................................14
Precautions for using batteries..............................14

Installing the Projector.................. 15

Precautions for Installation....................................15
Adjusting the Inclination of the Projector...............16
Installing the Projector against the Screen............17
Projection Distance and Screen Size....................18
Setting the Amount of Lens Shifting......................19
Effective Range and Distance of the
Remote Control Unit..............................................20
Setting the Position Selecting Screw for
Ceiling Mounting ...................................................21

Connecting to Various Devices.... 22

Signals that Can Be Input to the Projector ............22
Connecting to Video Devices ................................24
Connecting to Hi-Vision Devices...........................25
Connecting to Other Devices ................................26
Connecting to Devices which Control the
Projector................................................................27
Connecting to Computer Devices .........................28
Connecting to Computer Devices (Cont.) .............29
Connecting the Power Cord ..................................30
Removing the Lens Cap........................................30

Basic Operations ........................... 31

1. Turning on the Power........................................31
2. Select the Input source to be Projected ............32
3. Adjust the Screen Size (Zooming) ....................32
4. Adjust Focus .....................................................33
5. Adjusting Sound Volume...................................33
Turning off Image and Sound (HIDE)....................34
Removing the Trapezoidal Distortion of the
Image ....................................................................34
Quick Alignment Function
(QUICK ALIGN.)....................................................35
Displaying a Still Picture (FREEZE) ......................36
Zooming a Part of the Image
(DIGITAL ZOOM +/–) ............................................36

Menu Operations ........................... 37

Basic Menu Operation...........................................42
Basic Menu Operation (Cont.)...............................43
Changing the Color System
(Video Menu Mode Only) ......................................44
Changing the Language Display ...........................45
Changing the Screen aspect ratio/HDTV format
(Video Menu Mode Only) ......................................45
Adjusting Tracking / Phase ...................................46

Adjusting Picture Quality ...................................... 47
Adjusting Color temperature................................. 48
Adjusting the Video Screen/Menu Position .......... 49
Changing the Image Tone/Aspect Ratio
(Video Menu Mode Only) ..................................... 50
Changing the Image Size - Resize Function
(PC Menu Mode Only).......................................... 51
Changing the Clamp pulse position
(PC Menu Mode Only).......................................... 51
Setting and Adjusting Other Functions
(OPTIONS)........................................................... 52
Getting Information............................................... 54

Replacing the Fuse ........................ 55
Replacing the Light-Source Lamp 56
Cleaning and Replacing the
Filter Cover ..................................... 60
Troubleshooting............................. 61
Warning Indication......................... 63
Warning Messages ........................ 64
Specifications................................. 66

Outside dimensions.............................................. 68
Pin assignment (Specifications for terminals) ...... 69

RS-232C external control .............. 70
Appendix......................................... 72

Advertising