JVC CA-MXS6MD - Manual (Page 41)

– 38 –
English
5
Press the open/close button ( 0 CD1, 0 CD2, or
0 CD3) for the CDs already played to replace the
CDs.
• You can change CDs to continue the First Track
Recording using more than 3 CDs.
When the first track of the last loaded CD is recorded, First
Track Recording stops.
To stop recording, press
7. “WRITING” flashes for a
while.
Both the CD player and the MD recorder stop.
During First Track Recording
Repeat play mode will be canceled automatically.
Recording the External Equipment — Sound
Synchronized Recording
With this recording method, you can start recording
automatically when the source sound comes into this unit
through the LINE 1 jacks, LINE 2 jack, or the DIGITAL IN
terminal. Sound Synchronized Recording will stop
automatically if no sound comes in for more than 30
seconds.
When the sound signal comes in through the DIGITAL IN
terminal, digital recording is performed.
1
Insert a recordable MD into the MD loading slot.
2
Press LINE repeatedly to select the external
equipment you want to record from.
• When selecting the equipment connected either the
LINE 1 jacks or LINE 2 jack, the sound input level
appears for a while. (See page 63 for the sound input
level.)
3
Press LONG MODE on the unit if necessary.
The recording length mode changes as follows:
• For the recording length mode, see “Stereo Long-
Hour Recording (MDLP)” on page 33.
SP
(Standard Play)
LP4
(4 Times Long Play)
LP2
(2 Times Long Play)
4
Select Sound Synchronized Recording.
1) Press REC MODE.
2) Press SET.
The REC PAUSE lamp on the unit starts flashing.
5
Start playback on the external equipment.
The REC PAUSE lamp stops flashing and remains lit,
and recording starts automatically.
To stop recording, press
7. “WRITING” flashes for a
while.
When the source for recording is the equipment
connected to either the LINE 1 jacks or the LINE 2
jack
You can select the sound input level. See “Selecting the sound
input level” on page 63.
When recording is stopped or finished
Sound Synchronized Recording is canceled automatically.
If Sound Synchronized Recording do not work
correctly
Use the Standard Recording method (see page 34).
Sound Synchronized Recording starts automatically when this unit
detects sound signals coming in. This means that, if sound signal is
too weak for this unit to detect, Sound Synchronized Recording
will not start (or will stop even while the source is being played).
When recording from a DAT deck using Sound
Synchronized Recording
Two track marks may be recorded at the beginning of the
recording. If this occurs, join these two track marks using the JOIN
function described on page 42.
Ex. When “LINE 1” is selected as a playback
source (with “Penguin” is selected as the
animation character)
EN31-38.CA-MXS6MD[US/UB]/f 00.10.10, 9:47 AM 38