JVC CA-MXS6MD User Manual
Page 46
– 43 –
English
3
Push the joy control downward (
) to select
“MOVE” (highlighted), then press SET.
4
Push the joy control downward (
) or upward (
)
to select the track you want to move.
5
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
6
Push the joy control downward (
) or upward (
)
to select the position where you want to move the
track to.
7
Press SET.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks by repeating from step
4.
Ex. When you want to move track 3
Ex. When you want to move to
the track 5 position
8
Press ENTER/DEMO to finish the editing
procedure.
“EDITING” appears for a while, then “WRITING”
flashes while the editing you have made is being
recorded on the MD.
ERASE Function
This function allows you to erase unwanted tracks.
• To stop any time during editing process, press TITLE/
EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
• It takes about 5 seconds for the unit to read the TOC
(Table Of Contents) of the inserted MD. While the
unit is reading it, you cannot go to the next step.
2
Press TITLE/EDIT.
The source is changed to “MD.”
3
Push the joy control downward (
) to select
“ERASE” (highlighted), then press SET.
4
Push the joy control downward (
) or upward (
)
to select the track you want to erase.
EN39-44.CA-MXS6MD[US/UB]/f
00.10.10, 9:50 AM
43