JVC UX-J99DVD - Manual (Page 69)

66
English
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press UP
¢ or DOWN 4 to
select the position where you want
to move the track to.
• You can also select the track using the number buttons. In this
case, the selected track starts playing repeatedly.
• If the track selected in this step belongs to a group, the track
selected in step 4 will be entered into the same group with the
current track after moving.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
8
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING” also
flashes while editing you have made is being recorded
on the MD.
Moving a Track—MOVE
This function allows you to move a track to the position you prefer.
It is useful to change the order of the tracks as you like.
Once a track is moved, the tracks and/or the groups are renumbered.
• To stop any time during the editing process below before step
8 ,
press TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press TITLE EDIT repeatedly until
“MOVE ?” appears on the display.
• If the loaded MD has no track, “MOVE ?” will not appear on
the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one track, you cannot go to the
following steps.
4
Press UP
¢ or DOWN 4 to
select the track you want to move.
• You can also select the track using the number buttons. In this
case, the selected track starts playing repeatedly.
Ex.: When track 3 is moved to track 8.
Ex.: When track 3 is selected.
EN63-70_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM 66