Using the timers, Continued), Timer priority – JVC UX-J99DVD User Manual

Page 78: Using sleep timer

Advertising
background image

75

English

To sleep with the Sleep Timer and wake up with the Daily
Timer

1

Set the Daily Timer as explained on pages 73 and 74.

2

Start playing back any source you want to listen to before
sleep.

3

Set the Sleep Timer.

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Below is the example of timer priority.

A timer with the earlier start time has priority.
If Recording Timer is set to come on while Daily Timer is operating,
Recording Timer will not work.

Sleep Timer always has priority.
If Sleep Timer is set to come on while Recording Timer is operating,
Recording Timer will be canceled when the shut-off time of Sleep
Timer comes.

Sleep timer and Auto Standby (see page 11) can be used at the
same time.

Daily Timer

Recording Timer

will not start

6:00

6:30

7:00

7:30

Using Sleep Timer

With Sleep Timer, you can fall asleep to your favorite music.
• You can set Sleep Timer only when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length
passes.

On the remote control ONLY:

Press SLEEP repeatedly.

The (timer) and the SLEEP indicators start flashing on
the display.
“SLEEP 10” appears on the display for a while.

• Each time you press the button, the time length changes as

follows:

About 5 seconds later, the (timer) and the SLEEP indicators stop
flashing and remain lit.
When the Sleep Timer is activated, DIMMER 1 is automatically
activated (see page 12).

To check the remaining time until the shut-off time, press SLEEP
once. The remaining time until the shut-off time appears for about 5
seconds.

To change the shut-off time, press SLEEP repeatedly until the time
length you want appears.

To cancel the setting, press SLEEP repeatedly until the (timer)
and SLEEP indicators go off from the display.

Sleep Timer will be also canceled in the following cases:

• When you turn off the unit.
• When you operate other timer settings.
• When you adjust the clock.

SLEEP

10

20

30

Source indication

(canceled)

60

90

120

6:00

6:30

7:00

7:30

Recording Timer

Sleep Timer

canceled

Using the Timers

(continued)

EN71-75_UX-J99DVD[UB]5.p65

03.12.12, 11:06 PM

75

Advertising