Juniper Networks EX4200 - Manual (Page 139)

Chapter 9
Installing the Switch
■ Installing and Connecting an EX3200 or EX4200 Switch on page 113
■ Unpacking an EX3200 or EX4200 Switch on page 114
■ Mounting an EX3200 or EX4200 Switch on page 116
■ Mounting an EX3200 or EX4200 Switch on a Desk or Other Level
Surface on page 117
■ Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or
Cabinet on page 118
■ Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or
Cabinet on page 121
■ Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or
Cabinet on page 124
■ Mounting an EX3200 or EX4200 Switch on a Wall on page 125
Installing and Connecting an EX3200 or EX4200 Switch
The EX3200 and EX4200 switch chassis is a rigid sheet-metal structure that houses
the hardware components.
To install and connect an EX3200 or EX4200 switch:
1. Follow instructions in “Unpacking an EX3200 or EX4200 Switch” on page 114.
2. Mount the switch by following instructions appropriate for your site:
■ “Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet”
on page 118 (using the mounting brackets provided)
■ “Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet”
on page 121 (using the separately orderable four-post rack-mount kit)
■ “Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack
or Cabinet” on page 124 (using the 2-in.-recess front brackets from the
separately orderable four-post rack-mount kit)
■ “Mounting an EX3200 or EX4200 Switch on a Desk or Other Level Surface”
on page 117 (using the rubber feet provided)
■ “Mounting an EX3200 or EX4200 Switch on a Wall” on page 125 (using the
separately orderable wall-mount kit)
Installing and Connecting an EX3200 or EX4200 Switch ■ 113