Connecting external equipment, Caution on installation – JVC UX-Z7MDR User Manual

Page 13

Advertising
background image

– 8 –

R

L

R

L

SPEAKER IMPEDANCE 4~16

SPEAKERS

CAUTION:

Connecting External Equipment

You can connect another equipment which can be used as a
playback device.

When you connect and use the equipment, refer also to its
manual supplied.

• DO NOT connect other equipment while the

power is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect external equipment

Be sure that the plugs of the audio cords and the jacks on
the rear of the unit are color-coded: White plugs and jacks
are for left audio signals, and red ones for right audio
signals.

Speaker grille

Projections

Holes

To remove the speaker grilles

The speaker grilles are removable as illustrated below:

To remove the speaker grille, insert your fingers at the top
of the speaker grille, then pull towards you. Also pull the
bottom towards you.

To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.

Caution on installation

This unit is compact but high powered, so it has a built-
in cooling fan which operates when the internal heat
rises due to continuous use and/or high volume level.
If you want to place speakers or any equipment on the
sides of the unit, leave a space of at least 1 cm between
the main unit and each of them to obtain sufficient
cooling effect.

To AUX/DVD jacks

External equipment

R

Right

Left

L

EN01-09UX-Z7MDR[B]f

02.6.28, 13:46

8

Advertising