JVC CA-MXJ787V - Manual (Page 14)

9
English
Surround modes * :
D.CLUB: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA modes:
ROCK: Boosts low and high frequency. Good for acoustic
music.
POP: Good for vocal music.
CLASSIC: Good for classical music.
Manual modes:
MANUAL1/2/3: Your individual mode stored in memory. See
“Creating Your Own Sound Mode — Manual
Mode.”
OFF: Cancels the sound mode.
* Surround elements are added to the SEA elements to create a
being-there feeling in your room.
When one of these modes is selected, the SOUND MODE
indicator lights up as —
While one of the SEA modes including manual modes (SEA elements
without surround elements) is selected,
it lights up as —
Creating Your Own Sound Mode — Manual Mode
You can change SEA pattern to suit your preference. These changed
setting can be stored in the MANUAL 1, 2, and 3 modes.
• There is a time limit in doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
• If you want to add the surround elements in your SEA pattern,
select one of the surround modes (D.CLUB, HALL, or
STADIUM) before starting the procedure below.
On the unit On the unit ONLY ::
1
Press and hold SEA CONTROL k until “SEA
CONT” appears on the display.
Current level appears.
TUNING
SET
SEA CONTROL
SOUND MODE
PRESET
PREV NEXT
SET
SEA CONTROL
2
Adjust the SEA pattern.
1) Press 4 ; or ¢ ; to select the frequency
range to adjust (LOW, MID, HIGH).
2) Press 1 x or ¡ x to adjust the level (–3
to +3) of the selected frequency range.
3) Repeat steps 1) and 2) to adjust the level of the
other frequency ranges.
3
Press SEA CONTROL k again.
4
Press 4 ; or ¢ ; to select one of the
MANUAL 1, 2 and 3 modes into which you want to
store the SEA pattern.
5
Press SEA CONTROL k again.
The SOUND MODE indicator also lights up.
The SEA pattern you have created are stored into the MANUAL
mode selected in the above step.
To use your own sound mode
select MANUAL 1, 2 or 3 mode when using the sound modes. See
"Selecting the Sound Modes".
SET
SEA CONTROL
SOUND MODE
SOUND MODE
EN6-17;MX-J777V/PM6 7/8/99, 9:16 AM 9