JVC CA-UXGN7V - Manual (Page 12)

9
Prep
a
rat
io
n
NOTE
• Before connecting or disconnecting an external
device, press [VOLUME ] repeatedly to set the
volume of this system to the minimum. You can
also use the [VOL –] control on the main unit.
• Select the appropriate setting for “DIGITAL
AUDIO OUTPUT” according to the connected
device. Refer to page 35.
• You can output the audio signal from the
[OPTICAL DIGITAL OUTPUT] terminal when
“DVD/CD” is selected as the source in the dis-
play window.
When you connect this system with an amplifier-
built-in subwoofer (not supplied), you can enjoy a
more dynamic bass sound. Refer to the manual of
the subwoofer for details.
• Connect the power cable after you complete the
other connections.
• The [STANDBY] lamp on the main unit lights up.
Connecting an external
digital audio device
Main unit
(rear view)
Output
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input AV amplifier with
a built-in decoder
Connecting a subwoofer
Connecting the power cable
Audio cable (not supplied)
(Use the audio cable supplied with
the amplifier-built-in subwoofer or
a commercially available cable.)
Amplifier-built-in subwoofer
(not supplied)
Main unit
(rear view)
AC outlet
Main unit
(rear view)
Preparation (continued) Do not connect the power cable until all other connections have been made.
UX-GN7V[US]EN.book Page 9 Monday, January 19, 2009 11:51 AM