JVC CA-UXGN7V - Manual (Page 43)

40
Re
cord
in
g
soun
d
d
ir
ect
ly
fro
m
a CD
to a USB dev
ice
The operation is explained with the example of
entering “F”.
1
Press [DISPLAY/CHARA] repeat-
edly to select the character type
setting.
• Each time you press [DISPLAY/CHARA],
the selected character type setting changes
to “ABCDE” or “01234” on the TV screen.
• “ABCDE” refers to uppercase letters or sym-
bols.
• “01234” refers to numbers.
• You can also confirm the character type set-
ting in the display window. “A” or “1” is dis-
played instead of “ABCDE” or “01234”.
2
Press the number button [3]
repeatedly until “F” appears.
• Several characters are assigned to one but-
ton. Press the button repeatedly until the
desired character is displayed. In this exam-
ple, “D”, “E” and “F” are assigned to [3].
• For the available characters, refer to “Avail-
able characters” shown on the right.
3
Press [ENTER/SET].
NOTE
• When you want to move the character entry
position, press  or  repeatedly.
• You can enter up to 24 characters for the track
title and up to 28 characters for the group title.
• When you want to erase a character, move the
character entry position to the desired character,
and press [CANCEL].
• When you want to enter a space, select the
space from the symbol (Refer to “Available char-
acters” shown on the right). You can also enter a
space at the end of a title by pressing .
• When you want to cancel title entry, press 7.
The entered characters are not stored.
• If “PROHIBIT” appears in the display window,
the connected USB device is prohibited from
editing the track/group.
• If “DUPLICAT” appears in the display window,
the same title has been recorded.
• If “NO NAME” appears in the display window, no
name is entered when adding a title to a track/
group.
Available characters
You can use the characters shown below by
repeatedly pressing the number buttons ([1] to [9]
and [0]). Each number button is assigned with sev-
eral characters.
* Available symbols
You can use the symbols show below by repeat-
edly pressing [1].
Entering a title
Remote
control
button
Uppercase
letters
Numbers
Symbols*
Space
For the locations of the remote
control buttons, refer to page 37.
UX-GN7V[US]EN-08.fm Page 40 Wednesday, April 8, 2009 10:17 AM