JVC CA-UXGN7V - Manual (Page 49)

Ti
m
e
r
46
You can program up to 3 playback timer settings.
Set the clock beforehand. (Refer to page 13.)
1
Press [CLOCK/TIMER] repeatedly
to select “TIMER-1 ( 1)”, “TIMER-
2 ( 2)” or “TIMER-3 ( 3)” in the
display window.
2
Press [ENTER/SET].
3
Set the starting time and ending
time with  or  and [ENTER/
SET].
4
Press  or  to select the desired
source, and then press [ENTER/
SET].
• If you have selected “TUNER FM” or “TUNER
AM” in this step, press ,  or the number
buttons to select the preset number of the
radio station whose broadcast you want to lis-
ten to, and then press [ENTER/SET].
• Having selected “DVD/CD” or “USB”, you
can select the title, group, chapter, track or
file in the same procedure. However, you
cannot select the title, group, chapter, track
or file number exceeding 150.
• When a DVD VIDEO is selected as the
source, playback may not start with this
function.
5
Press  or  to adjust the play-
back volume, and then press
[ENTER/SET].
• The “ 1”, “ 2” or “ 3” indicator lights up.
6
Press [AUDIO/TV F] to turn off
the main unit.
NOTE
• While setting the playback timer, you can return
to the previous step by pressing [CANCEL] or
you can stop the setting by pressing [CLOCK/
TIMER].
• When the power cable of the main unit is discon-
nected from the AC outlet or the power is inter-
rupted, the clock setting is lost. At this time, set
the clock and then the playback timer again.
1
Press [CLOCK/TIMER] repeatedly
to select “TIMER-1 ( 1)”, “TIMER-
2 ( 2)” or “TIMER-3 ( 3)” in the
display window.
2
Press [CANCEL].
Using the playback timer
Canceling the playback timer
UX-GN7V[US]EN-10.fm Page 46 Friday, February 13, 2009 10:03 AM