JVC CA-UXGN7V - Manual (Page 13)

Prep
a
rat
io
n
10
To view an image on the TV screen, select the
video signal type correctly according to the TV
after connecting the main unit to the TV.
1
Turn on the main unit.
• Refer to “Turning on/off the main unit” on
page 11.
2
Press [SCAN MODE] repeatedly to
select the video signal type suit-
able for the TV.
• Select “PAL” for a TV only compatible with a
PAL interlaced video signal.
• Select “PAL PRG” for a TV equipped with a
component terminal and compatible with a
PAL progressive video signal.
• Select “NTSC” for a TV only compatible with
an NTSC interlaced video signal.
• Select “NTSC PRG” for a TV equipped with
a component terminal and compatible with
an NTSC progressive video signal.
NOTE
• When “PAL PRG” or “NTSC PRG” is selected,
the “PRGR.” indicator lights up in the display
window.
3
Press [ENTER/SET].
Selecting the video signal
type
UX-GN7V[US]EN.book Page 10 Monday, January 19, 2009 11:51 AM