JVC KD-LH2000R - Manual (Page 47)

47
ENGLISH
To play back only intros (Intro Scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press MODE (M) to enter the
functions mode while playing a
disc.
“Mode” appears on the display.
2 Press INT (intro), while “Mode” is
still on the display, so that the INT
indicator is highlighted on the
display.
Each time you press INT, the intro
scan mode changes as follows:
Ex.: When you select “Intro 1.”
Intro Highlighted Of all tracks on
1 all inserted discs.
Intro Flashes Of the first track on each
2 inserted disc.
When Intro Scan is turned on, the INTRO indicator
lights up or flashes on the display.
Plays the beginnings
INT
Indicator
Mode
To play back tracks repeatedly (Repeat Play)
You can play back the current track or the tracks
on the current disc repeatedly.
1 Press MODE (M) to enter the
functions mode while playing a
disc.
“Mode” appears on the display.
2 Press RPT (repeat), while “Mode”
is still on the display, so that the
RPT indicator is highlighted on the
display.
Each time you press RPT, the
repeat play mode changes as
follows:
Ex.: When you select “Repeat 1.”
Mode
Repeat Highlighted The current track
1 (or specified track).
Repeat Flashes All tracks of the current
2 disc (or specified disc).
When Repeat Play is turned on, the REPEAT
indicator lights up or flashes on the display.
Plays repeatedly
RPT
Indicator
RPT indicator
(See the following table.) REPEAT indicator
INT indicator
(See the following table.) INTRO indicator
Repeat 1 Repeat 2
Repeat Off
Intro 1 Intro 2
Intro Off
EN44-47LH2000R[E]f.pm5 02.3.29, 4:26 PM 47