Troubleshooting – JVC KD-LH2000R User Manual

Page 54

Advertising
background image

54

ENGLISH

General

Playback

Remedies

Stop playback while driving on
rough roads.

Change the disc.

Check the cords and
connections.

Adjust it to the optimum level.

Check the cords and
connections.

Insert the disc correctly.

• Insert a finalized

CD-R/CD-RW.

• Finalize the CD-R/CD-RW

with the component which
you used for recording.

(See page 56.)

Insert a disc into the loading slot.

Insert the disc correctly.

Unlock the disc (See page 22.)

Press the reset button on the
panel holder using a ball-point
pen after detaching the control
panel. (The clock setting and
preset stations stored in memory
are erased.) (See page 2.)

Remove the control panel, wipe
the connectors, then attach it
again. (See page 43.)

Store stations manually.

Connect the antenna firmly.

What appears to be trouble is not always serious. Check the following points before calling a service
center.

TROUBLESHOOTING

Causes

You are driving on rough
roads.

Disc is scratched.

Connections are incorrect.

The volume level is set to the
minimum level.

Connections are incorrect.

Disc is inserted upside down.

CD-R/CD-RW is not finalized.

No disc in the loading slot.

Disc is inserted incorrectly.

Disc is locked.

The built-in microcomputer
may have functioned
incorrectly due to noise, etc.

The control panel is not
attached correctly and firmly.

Signals are too weak.

The antenna is not connected
firmly.

FM/AM

Symptoms

• Sound is sometimes

interrupted.

• Sound cannot be heard

from the speakers.

• CD cannot be played back.

• CD-R/CD-RW cannot be

played back.

• Tracks on the CD-R/CD-RW

cannot be skipped.

• “No Disc” flashes on the

display .

• Disc cannot be ejected.

• This unit does not work at

all.

“Panel Connect Error”
appears on the display.

• SSM (Strong-station

Sequential Memory)
automatic preset does not
work.

• Static noise while listening

to the radio.

EN54-57LH2000R[E]f.pm5

02.3.29, 4:27 PM

54

Advertising