JVC KD-LH2000R - Manual (Page 51)

51
ENGLISH
5
Press and hold the number button
(in this example, 1) you want to store
the selected service into for more
than 2 seconds.
6
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• You can only preset primary DAB services. If you store
a secondary service, its primary service will be stored
instead.
• A previously preset DAB service is erased when a new
DAB service is stored in the same preset number.
The display pattern automatically changes to the
non-animation display and the preset number
flashes (then the previous display pattern resumes).
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see page
50 .
Selecting a preset service directly
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2 or
DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
3
Select the number (1 – 6) for the
preset DAB service (primary) you
want.
FM/AM DAB
DAB1 DAB2 DAB3
Note:
If the selected primary service has some secondary
services, pressing the same number button
repeatedly will tune in to the secondary services.
EN49-53LH2000R[E]f.pm5 02.3.29, 4:27 PM 51