Changing audio guidance mode, Displaying voice recognition software version – Samsung SPH-M560 User Manual
Page 36
30 Voice Service
6.
Select Adapt Voice.
7.
Press the left softkey
for START.
8.
You will be prompted to record a series of commands. To reject a
recording, press the right softkey
for BACK and record again.
Tip:
To reset voice, press Reset Voice while in the Adaptation menu.
Changing Audio Guidance Mode
By default, your phone is set to prompt mode and provides audio prompts such as
“Please say a command”.
To change the audio guidance mode:
1.
Activate the main menu, highlight the Settings menu, and press
.
2.
Select More....
3.
Select Accessibility.
4.
Select Voice Service.
5.
Select Audio Modes.
6.
Highlight one of the following:
•
Expert Mode
: Audio guidance is provided by beeps only.
•
Prompt Mode
: Prompts for the required information.
7.
Press the left softkey
for OK.
Displaying Voice Recognition Software Version
You can view information about the Voice Recognition Software on your phone.
To display voice recognition software version:
1.
Activate the main menu, highlight the Settings menu, and press
.
2.
Select More....
3.
Select Accessibility.
4.
Select Voice Service.
5.
Select About. Press the right softkey
for BACK to exit.
m560 BMC.book Page 30 Wednesday, September 2, 2009 3:39 PM