Sony STR-DN2010 - Manual (Page 103)

103 GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right
STR-DN2010
4-182-049-11(1)
Other Oper
ations
5
Press V/v repeatedly to select
the setting you want.
• OFF: You cannot enjoy the S-AIR
receiver while the S-AIR main unit is in
standby mode.
• ON: You can enjoy the S-AIR receiver
while the S-AIR main unit is in standby
mode or turned on.
To exit the menu
Press MENU.
Notes
• When you set “S-AIR Standby” to “ON”, the
power consumption increases during the standby
mode.
• When the wireless transmitter is removed from the
S-AIR main unit, “S-AIR Standby” is set to “OFF”
automatically.
• When “S-AIR Mode” is set to “SEPARATE”, if
you have selected “FM TUNER” or “AM TUNER”
on the S-AIR main unit before you turn it off and
“S-AIR Standby” is set to “ON”, you can only
select the same band for the tuner on the S-AIR
receiver. However, you can select input other than
TUNER on the S-AIR receiver.
• When “S-AIR Mode” is set to “SEPARATE”, if
you have selected a network function (“SERVER”
or “Rhapsody” or “SHOUTcast”) on the S-AIR
main unit before you turn it off and “S-AIR
Standby” is set to “ON”, you can only select the
same network function on the S-AIR receiver as
function on the S-AIR main unit. However, you
can select input other than network functions on
the S-AIR receiver.
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
• When the receiver is in standby mode,
“A. STANDBY” appears on the display if “S-AIR
Standby” is set to “ON”.
Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1
Press INPUT SELECTOR +/– on
the receiver to select the input.
You can also use the input buttons on the
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
• AUTO
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
When TV input is selected, priority is
given to the Audio Return Channel
(ARC) signals. If your TV is not
compatible with the Audio Return
Channel (ARC) function, the digital
optical audio signals are selected.
• OPT
Appears only when TV input is
selected, and specifies the digital optical
audio signals input to the TV OPTICAL
IN jack.
• ANALOG
Specifies the analog audio signals input
to the AUDIO IN (L/R) jacks.
Other Operations
continued