Sony STR-DN2010 - Manual (Page 114)

114 GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left
STR-DN2010
4-182-049-11(1)
EQ Settings menu
You can use the following parameters to adjust
the tonal quality (bass/treble level) of front
speakers.
Note
This function does not work in the following cases.
– “A. DIRECT” is being used.
– Signals with a sampling frequency of more than 48
kHz are being received.
To adjust the equalizer on the
EQ screen
1 Press .
2 Press B/b repeatedly to select “Bass”
or “Treble”.
3 Press V/v repeatedly to adjust the gain,
then press .
Audio Settings menu
You can make settings for the audio to suit
your preference.
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
x 0 ms – 300 ms
You can adjust the delay from 0 ms to 300 ms
in 10 ms steps.
Notes
• This function is useful when you use a large LCD
or plasma monitor or a projector.
• This function does not work in the following cases.
– “A. DIRECT” is being used.
– Signals with a sampling frequency of more than
96 kHz are being received.
Lets you select the language you want when
you listen to the dual audio of a digital
broadcast. This feature only functions for
Dolby Digital sources.
x MAIN/SUB
Sound of the main language will be output
through the front left speaker and sound of the
sub language will be output through the front
right speaker simultaneously.
x MAIN
Sound of the main language will be output.
x SUB
Sound of the sub language will be output.
Level
(dB)
Bass Treble
Frequency
(Hz)
A/V Sync (Synchronizes audio
with video output)
Dual Mono (Digital broadcast
language selection)