Sony STR-DN2010 User Manual
Page 11
11
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm
masterpage: Right
STR-DN2010
4-182-049-11(1)
Indicator and explanation
J SLEEP
Lights up when the Sleep Timer is activated.
K LPCM
Lights up when the receiver is decoding the
Linear PCM signals.
L DTS(-ES) indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding DTS
format signals.
DTS
DTS-ES
DTS 96/24
DTS
DTS-ES
DTS 96 kHz/24 bit
Note
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is not set to “ANALOG”
M Tuning indicators
Lights up when the receiver tunes in radio
stations, or satellite radio stations.
RDS (European model only)
A station that provides RDS services is tuned in.
CAT (USA model only)
The category mode is selected during the
satellite radio operation.
MEM
A memory function, such as Preset Memory
(page 63), etc., is activated.
SIRIUS (USA model only)
The SiriusConnect Home tuner is connected and
“SIRIUS” is selected.
ST
Stereo broadcast
N EQ
Lights up when the equalizer is activated.
O D.RANGE
Lights up when dynamic range compression is
activated (page 113).
P
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.
Indicator and explanation
Q Playback channel indicators
The letters (L, C, R, etc.) indicate the channels
being played back. The boxes around the letters
vary to show how the receiver downmixes the
source sound (based on the speaker settings).
LH
RH
L
R
C
SL
SR
S
SBL
SBR
SB
Front Left High
Front Right High
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
Surround Back Left
Surround Back Right
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO