Sony STR-DN2010 - Manual (Page 109)

109 GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right
STR-DN2010
4-182-049-11(1)
Adj
u
s
tin
g Setti
ng
s
3 Press V/v repeatedly and to
uncheck the items you do not want to
measure, then press
b.
The confirmation screen, asking whether
you are ready to start measurement,
appears.
4 Press to select “Start”.
The measurement results is registered as
the position you selected in step 1.
5 Repeat step 1 to 4 to register another
seating position.
To select the registered seating
position
Press V/v repeatedly to select the position
(Pos. 1, 2, 3) you want, then press .
The registered seating position is selected.
To name the seating position
You can rename the position name.
1 Select the position (Pos. 1, 2, 3) you
want, then press
.
2 Press TOOLS/OPTIONS.
3 Select “Name Input”, then press .
4 Press V/v repeatedly to select a
character, then press b.
You can move the input position backward
and forward by pressing
B/b.
5 Repeat step 4 to input a character one
by one, then press
.
The name you entered is registered.
Speaker Settings menu
You can adjust each speaker manually.
You can also adjust the speaker levels after the
Auto Calibration is completed.
Note
The speaker settings are only for the current seating
position.
Select “Speaker Pattern” according to the
speaker system which you are using. Select the
speaker pattern before you perform Auto
Calibration.
Lets you set the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals for a bi-amplifier or speakers front B
connection.
x OFF
x BI-AMP
x SPEAKER B
Note
When you change the connection from a bi-
amplifier or speakers front B to surround back or
front high speakers connection, set “Sur Back
Assign” to “OFF”, then set up the speakers again.
See “Auto Calibration” (page 42) or “Manual
Setup” (page 110).
Speaker Pattern
Sur Back Assign