Tone sequences (dtmf) – Siemens Gigaset 200 User Manual
Page 28
27
Calling
© Siemens AG 2003, D:\Auftrag\Mobilepho
nes\C75 Aries\mx_us-en\LA\Aries
_Phone.fm
Template:
X75, 140x105, Version 2.2;
VAR Languag
e: am; VAR issue date: 050718
right page (27)
of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19
Apply
§Carol§
To dial the phone number
(e.g. Carol’s phone num-
ber), press and hold the
right display key.
Switch off
#
Press down:
J
Enter phone code.
C
Confirm input.
Tone sequences (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists
. These
entries are transmitted directly as
DTMFcodes (control codes).
§Options§
Open menu.
Send DTMF
Select.
Using the Phonebook/
Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phone-
book/Addressbook in the same way
as a normal entry.
J
Enter phone number.
0
Press until a "+" appears in
the display (wait for the
connection to be estab-
lished).
J
Enter DTMF codes
(numbers).
0
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
J
Enter a name.
§Save§
Store entry.
You may also store just the DTMF
codes (numbers) and then send
them during the call.