Siemens Gigaset 200 - Manual (Page 85)

Settings 84
© Siemens AG 2003, D:\Auftrag\Mobilephone
s\C75 Aries\mx_us-en\LA\Aries
_CallSetup.fm
Template:
X75, 140x105, Version 2.2;
VAR Languag
e: am; VAR issue date: 050718
left page (84) of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19
All calls
b
All calls are forwarded.
Ç
Icon in the top line of the
display in standby mode.
Not reachable
Forwarding occurs if phone is
switched off or out of range.
No reply
A call is only forwarded after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5-second intervals.
Busy
Forwarding occurs if a call is in
progress. If Call waiting is activated
(page 83), you will hear the call
waiting tone during a call (page 25).
Receiving fax
b
Fax calls are forwarded to a number
with a fax connection.
Receiving data
b
Data calls are forwarded to a number
with a PC connection.
Call screening b
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signaled. Other calls
are only displayed.
Any key
Incoming calls can be accepted by
pressing any key (except for
B
).
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
Additional information
Note that the forward is stored in the net-
work and not in the phone (e.g. when the
SIM card is changed).
Reactivate forwarding
The last forwarding has been stored.
Proceed as with "Set forwarding". The
stored phone number is displayed.
Confirm number.