Siemens Gigaset 200 - Manual (Page 84)

83 Settings
© Siemens AG 2003, D:\Auftrag\Mobilephone
s\C75 Aries\mx_us-en\LA\Aries
_CallSetup.fm
Template:
X75, 140x105, Version 2.2;
VAR Languag
e: am; VAR issue date: 050718
right page (83) of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19
Settings Call setup
C
¢
T
¢
Call setup
¢
Select feature.
Hide ID b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on ser-
vice providers).
To suppress this display, you can en-
able the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
features.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions under
which calls should be forwarded to
your mailbox or other numbers.
Status check
You can check the current forward-
ing status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Ö
Condition set.
Õ
Not set.
Ô
Display if status is un-
known (e.g. with a new
SIM card).
Clear all
b
All forwards previously set are
cleared.
Set up call forward (example)
The most common condition for call
forwarding is, for example:
Unanswered
b
I
Select Unanswered .
(Includes the conditions
Not reachable , No reply ,
Busy , see below.)
C
Confirm.
Set Select.
C
Confirm.
Ï
/
J
Select or enter the phone
number to which the calls
are to be forwarded.
§Mailbox§ Use existing mail-
box phone numbers, or
enter them if necessary.
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.