Siemens Gigaset 200 - Manual (Page 92)

91 Settings
© Siemens AG 2003, D:\Auftrag\Mobilephone
s\C75 Aries\mx_us-en\LA\Aries_Security.fm
Template:
X75, 140x105, Version 2.2;
VAR Languag
e: am; VAR issue date: 050718
right page (91) of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19
Settings Security
C
¢
T
¢
Security
¢
Select feature.
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Direct call
(Phone-code protected)
Only one phone number can be
dialed (see also page 26).
Only
‚
b
(PIN2 or phone code protected)
Dialing options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually be-
fore dialing.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
This SIM only b
(Phone-code protected)
The phone can be connected to
a SIM card when the phone code is
entered. Unless the phone code is
known, the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
PIN code
Description, see page 16:
PIN control , Change PIN , Change PIN2 ,
Chg.phonecode
Additional information
The keypad can also be directly locked and
unlocked in the idle state.
In each case:
#
Press and hold.