SmartBridges sB3412 - Manual (Page 61)

Page 61 of 78
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus PRO TOTAL User Guide
The following page summarizes the page contents of the System Configuration page.
Table 8-1 System Configuration Page Items
Page Item Descriptions.
System Name Displays name of aCNPT unit
Allows user to change aCNPT unit name
System Description Displays description of aCNPT unit
Allows user to change aCNPT unit description
SNMP Security Access the SNMP security settings
Reset Reset device
Reset To Factory
Defaults
Reset device to factory defaults
Delayed Reset Schedule a reset
NTP Server NTP server setup, as well as NTP time if server is setup
Software Version Display the installed firmware version
Radio Firmware
Version
Display the installed radio firmware version
Edit Configuration Provide links to edit IP, radio, configurations
Ethernet MTU Size Set the Ethernet MTU Size
Syslog server IP
Address
Display the current message Syslog server IP Address.
User can change the IP address.
SNMP Trap IP Display the current SNMP trap IP address.
User can change the IP address.
Log Level Display the current Log Level
WatchGuard
Suspends/Enables the radio defenders.
If the WatchGuard is suspended, the defenders will stop for 2 hours and start
again thereafter.
If the WatchGuard is enabled the radio defender’s will start immediately.
Note: The Radio Defenders will monitor the Wireless Association Status
(automatically) and traffic and take corrective action if needed.
LED Control Displays the current LED status.
The user can change the LED status to on/off
Current
Operational mode
Display the current operational mode.
User can change the current operational mode.