SmartBridges sB3412 - Manual (Page 68)

Page 68 of 78
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus PRO TOTAL User Guide
Figure 8-7 Ping Test Result
When the aCNPT is associated with an airPoint Nexus, you can do a Throughput Test to test the speed of
the link.
Follow the steps below to do a Throughput Test:
1. Enter a valid IP address of the far Radio.
2. Click on the ‘Radio Receive’ button on the near radio under the Throughput Test and the ‘Radio
Transmit’ button at the far radio.
3. The Throughput test will start and the result will be displayed.
4. Click on the ‘Stop’ button if you want to stop the test.
Note: The Throughput Test can be done only between Nexus units.