Sanyo ECD-T1545 - Manual (Page 26)

ACCESSORIES AND HARDWARE
Carrying Case
X1
Unlock Levers
X2
Removable Trim Ring
X1
Locking Screw
X1
Mounting Strap
and Screw X4
INSTALLATION
Mounting Bracket
(Half Sleeve) X1
INSTALLATION
1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does
not tilt by more than 30
0 .
23