Sanyo ECD-T1545 - Manual (Page 29)

4. Ground Wire (Black)
• Connect this wire to the vehicle chassis.
5. Power Antenna/Amplifier Turn On (Blue/Red)
• Connect this wire to the control terminal of a Power Antenna or an external amplifier.
• When not using a Power Antenna or an external amplifier, this wire is not connected.
6. I.R Remote Sensor Socket
• Connect a remote IR sensor to I.R remote sensor socket to use with the corresponding
remote control and to extend range of remote control.
7. CD Changer and Sirius Receiving Connector Socket
• Connect a CD changer to the CD changer and Sirius Receiving Connector socket
• Connect a Sirius module to the CD changer and Sirius Receiving Connector socket
(see separate instruction booklet on Sirius Radio operation)
• Connect a Sirius module and a CD changer to the CD changer and Sirius Receiving
Connector socket (see separate instruction booklet on Sirius Radio operation)
REMOTE IR SENSOR
(OPTIONAL)
(BLACK)
I.R REMOTE SENSOR SOCKET
MAIN UNIT
CDC
MAIN UNIT
(sold separately)
MAIN UNIT
SIRIUS MODULE (Sirius tuner module sold separately)
SIRIUS MODULE
MAIN UNIT
CDC
(Surius tuner module and CD changer sold separately
26