Samsung HCN529W - Manual (Page 31)

31
O
P E R AT I O N
4
A crosshair pattern will appear on
the screen.
After moving the cursor to the
position you want to adjust using
the ▲, , ,
▼ buttons on the
remote control, adjust Red
Convergence by pressing the VOL +/
VOL -/CH
/CH .
5
If a horizontal red line is visible, use
CH
and CH buttons to move
the line so that it is superimposed on
the horizontal center-line (i.e., make
a single horizontal line that is as
white as possible.)
6
If a vertical red line is visible, use
the VOL + and VOL - buttons to
move the line so that it is superim-
posed on the vertical-center line
(i.e., make a single vertical line that
is as white as possible.)
Adjust Red Convergence
7
For ‘Blue’ adjustment, do the same as the above.
After the red convergence is correctly adjusted, press EXIT to exit all
the menus.
Red Adjust
Move
Adjust Blue Adjust
Return
Red Adjust
Move
Adjust Blue Adjust
Return
Red Adjust
Move
Adjust Blue Adjust
Return