Samsung HCN529W - Manual (Page 49)

49
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear,
digital (HDTV) channels have either perfect reception quality or you will not receive
them at all. So, unlike analog channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital
channels.
1
Press the MENU button.
Press the ▼ button to
select “Channel”, then
press the ENTER button.
2
Press the ▼ button to
select “Check Signal
Strength (Digital)”, then
press the ENTER button.
Select Antenna : Air
Select Favorite Channel
Memorize Channel
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
T V Channel
T V Check Signal Strenght 3
If the signal strength meter
indicates that the signal is
weak, physically adjust
your antenna to increase
the signal strength.
Continue to adjust the
antenna until you find the
best position with the
strongest signal.
Press the MENU button
return.
Note
• “No Signal” may appear on the screen depending on the broadcasting
station conditions, even though an incoming broadcast signal exists.
S
P E C I A L
F
E AT U R E S
Digital
Select Antenna : Air
Select Favorite Channel
Memorize Channel
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
T V Channel
Return