Samsung HCN529W - Manual (Page 35)

35
O
P E R AT I O N
Storing Channels in Memory
▼
Note: The TV MUST be
connected to an antenna in
order to receive digital TV sig-
nals. Even if a particular chan-
nel is deleted from the memory,
you can always tune to that
channel directly by using the
number buttons on the remote
control.
▼
To return to the previous
step, move to “Return” by
pressing the button and then
press the ENTER button.
6
The TV will begin
memorizing all of the avail-
able channels.
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the ENTER
button when channel mem-
orization is complete.
5
Press the ▼ button to
select the antennas to
memorize.
Press the ENTER button
to select “Start”.
Select the antennas to memorize
ANT A
ANT B
ANT A + ANT B Start
Start
Start
T V Memorize Channels
Notes
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area.At this point
the signal source has been selected. Proceed to “Storing Channels in Memory”.
• Subscription cable services require service-specific equirement for viewing.
4
Press the ▼ button to
select antenna connection,
then press the ENTER
button
Select the antenna connection
ANT A ANT B
When selecting Cable TV system:
Press the ▼ button to
select “Cable”, then Press
the ENTER button.
Press the ▼ button to
cycle through these
choices:
“STD”, “HRC” or “IRC”.
Select the cable system
STD
HRC
IRC
Air None
Cable None
Air Cable
Cable Air
ANT A : Air
ANT A : Cable
ANT A : Air, ANT B : Cable
ANT A : Cable, ANT B : Air
T V Memorize Channels
T V Memorize Channels
Channel Memory in Process
CATV Channel 15
Stop Return
Memorize channels
Air None
Cable None
Air Cable
Cable Air
Note: When Receiving Digital Cable Signal :
If your cable service signal does not comply with
the ATSC requirement, this product may not operate
properly.