Samsung HCN529W - Manual (Page 46)

46
O
P E R AT I O N
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select “Input”.
TV / Video List
Edit Name
T V Input
2
Press the ▲ or ▼ button to
select signal source, then
press the ENTER button
When you connect equipment to the TV, you can choose between
the following sets of jacks : Video 1, Video 2, Video 3, S-Video 1,
S-Video 2, Component 1, Component 2 or DVI on the TV’s rear panel,
and Video 3 or S-Video 2 on the TV’s side panel.
TV
Video1 : - - - -
Video2 : - - - -
Video3 : - - - -
S-Video1 : - - - -
S-Video2 : - - - -
▼ More
T V TV/Video List
1
Press the MENU button.
Press the ENTER button to
select “Input”.
TV / Video List
Edit Name
T V Input
2
Press the ▼ button to
select “Edit Name”. TV / Video List
Edit Name
T V Input
Assigning Names to External input mode