Sanyo PLV-55WM1 - Manual (Page 25)

25
INPUT 1
INPUT 2
INPUT button
Input Source Selection (INPUT 3 / RGB, Video (Video conference), Component)
Direct Operation
FREEZE
+
AUDIO-S
SURROUND
INPUT 3
INPUT 4
INPUT 5
Front Panel
Remote Control
INPUT button
INPUT
MENU SELECT 7
VO –AUDIO–R
Select INPUT 3 by pressing the INPUT 3 button on the remote control
or pressing the INPUT button on the front panel arbitrary number of
times.
Before using these buttons, correct input source should be selected
through menu operation as described below.
See p16-17 for the connection diagrams.
INPUT 3
INPUT 4
INPUT 5
INPUT 3 button
Select the Input Menu with the Point Up / Down button, and
then press the Point Right button to enter the sub-menu.
Select INPUT 3 with the Point Up / Down button and then press
the SELECT button or the Point Right button. The Source
Selection Menu will appear.
1
2
Move the pointer to the source that you want to select and then
press the SELECT button. 3
Menu Operation
Input Menu
Source Selection Menu
Closes the source selection
menu.
pointer
Video Input
Video Input
NOTE:
●
Select RGB when the input source is analog coming from a computer through the R, G, B,
H/V, V jacks.